Username: Password:

Author Topic: help......need a Nighthawk S measurement...  (Read 84 times)

Offline nsrrider

  • New Member
  • *
  • Posts: 10
    • View Profile
  • Bike: CB700SC
help......need a Nighthawk S measurement...
« on: December 02, 2017, 06:09:43 AM »
Hi guys, can one of you with a CB700SC get a measurement for me? I need the total length of the most rearward plastic "pin" (for lack of a better word) on the right side plastic cover. Mine is broke and missing and I need to fabricate one. Just need the length of the protruding plastic pin... from tip to base of the cover. This is the piece that snaps into the rubber grommet to secure the cover.  Or alternately, is the length of the pin the same as the left side cover? Thanks ahead of time! 

Offline mollusc

  • Senior Member
  • *****
  • Posts: 2076
    • View Profile
  • Bike: CB700S | NC700X
Re: help......need a Nighthawk S measurement...
« Reply #1 on: December 02, 2017, 07:31:34 AM »
I have posted this here before somewhere, but to make it easy:


made of meat

Offline nsrrider

  • New Member
  • *
  • Posts: 10
    • View Profile
  • Bike: CB700SC
Re: help......need a Nighthawk S measurement...
« Reply #2 on: December 02, 2017, 08:31:17 AM »
perfect! thanks much!

Offline Larry Fine

  • Member
  • **
  • Posts: 356
    • View Profile
  • Bike: 96 NH 750
Re: help......need a Nighthawk S measurement...
« Reply #3 on: December 02, 2017, 09:01:17 PM »
Not that I need to know, but do those numbers include or exclude the 14mm barbs?

Offline mollusc

  • Senior Member
  • *****
  • Posts: 2076
    • View Profile
  • Bike: CB700S | NC700X
Re: help......need a Nighthawk S measurement...
« Reply #4 on: December 03, 2017, 06:58:19 AM »
Hmmm.  Good question.  I don't remember from when I did the measuring.  I expect the easiest way for the OP to tell would be to check against one of the other, intact pins to see how I measured them.
made of meat

Offline nsrrider

  • New Member
  • *
  • Posts: 10
    • View Profile
  • Bike: CB700SC
Re: help......need a Nighthawk S measurement...
« Reply #5 on: December 03, 2017, 08:49:57 AM »
they did not include the 14mm tip.......thx again

 

Copyright © 2006 - 2018 Nighthawk-Forums.com
All Rights Reserved