Username: Password:

Author Topic: Nighthawk S restomod  (Read 267 times)

Offline nsrrider

  • New Member
  • *
  • Posts: 11
    • View Profile
  • Bike: CB700SC
Nighthawk S restomod
« on: January 19, 2018, 04:34:17 PM »
Full size pics

https://imgur.com/gFcVXqg
https://imgur.com/dIqOCWF
https://imgur.com/A3YqLYe
https://imgur.com/nx7R9is





 
 

This is my 1984 Honda CB700SC restomod project. When I started shopping for another vintage project, I originally had in mind a 1983 CB1100F, a bike I owned back in '83. Being produced only one year has made them fairly scarce...and consequently more money than was in my budget.
Then I happened upon this forlorn little Nighthawk S. It was the blue one, with 34K showing on the odometer, and it was in pretty rough shape. It looked like it had been stored outdoors at some time in its sad life and after initially looking at it, I decided to walk away.
Then, the seller hit the starter button. The pathetic little thing hummed like a well-oiled sewing machine-- and it seemed to cry out: "SAVE ME!"
Mind you, I don't get emotionally attached to motorcycles. I don't name them. A few of the last 75 motorcycles that I regret selling, I regret only because they would have been great investments. But, this sorry little bike seemed to beg me to take her home.
I got it home and immediately began doubting my decision. The paint was shot, every piece of plastic bodywork was cracked or missing mounting posts. Tires bald. Rust and road-rash everywhere. Front brakes were basically seized. Brake and clutch hydraulics felt bad. Shift linkage was shot. Various oil leaks. Every turn signal broken......the list goes on...and on.
My idea on bikes, even restorations, is to make them better than they ever were, while not destroying the original look. I'm just not interested in original-perfect restorations.
So, this is what I ended up with. In the pursuit of improved performance, installed a Mac 4 into 1 exhaust with a suitable jet kit. (Kinda' loud but, 21 LBS lighter) I modded the airbox to (hopefully) allow better breathing and installed a new filter. I fitted RFY shocks (actually not that bad of a low-budget shock) and determined that Progressive springs had already been installed in the front forks.
New tires, new brakes, new Barnett clutch, new hydraulics etc. I repainted the bodywork in OEM graphics, altering the black with red-pearl in the clear coats. Media blasted and powdercoated various engine cases. I elliminated the passenger pegs and welded up a cleaner exhaust hanger. Fitted a larger, 240CC battery. Installed an LED taillight/turnsignal unit into a cleaned up tail section. Lowered the passenger grab rail and reshaped the seat to better flow with the tail section (I always thought the Honda stylists missed the mark on that one way back then)
I installed a very bright LED unit in the stock headlight and mounted aluminum mirrors w/LED integrated turnsignals to take care of the front signals. Rebuilt the shift linkage, which BTW, made a huge improvement in shifting.
I always regarded the "S" as being a versatile, good looking and ahead of its time motorcycle. It entered the market with electronic ignition, hydraulic valves, shaft drive and a 6 speed tranny. It's performance, even by todays standards for a 700CC motorcycle is quite impressive.   
Anyway, I'm sure it's not everyone's idea of what it should be but, it's mine and I did all the work myself (except the seat cover)
Disclaimer: Forgive the phony stickers on the bike...my humor.       

Offline Hog Dog

  • Contributing Member
  • ***
  • Posts: 1293
  • Gender: Male
    • View Profile
  • Bike: Nighthawk 750
Re: Nighthawk S restomod
« Reply #1 on: January 19, 2018, 06:38:09 PM »
You did a great job on the 700.  2 thumbs up.
Lucky Lindy's evil twin

Offline TDodge7

  • Dedicated Member
  • ****
  • Posts: 1766
  • Gender: Male
    • View Profile
  • Bike: 84 CB700S
Re: Nighthawk S restomod
« Reply #2 on: January 24, 2018, 01:31:48 PM »
Well done, I like the gold!
I'm parting out a 92 750 in the for sale section

Offline DesertDragon

  • Member
  • **
  • Posts: 473
  • Gender: Male
    • View Profile
  • Bike: 96 Honda NH
Re: Nighthawk S restomod
« Reply #3 on: January 25, 2018, 08:42:41 AM »
Nice!
Thanks for sharing.
That is one sweet scoot.
Keep the Rubber on the Bottom!

DD

Offline Larry Fine

  • Member
  • **
  • Posts: 439
    • View Profile
  • Bike: 96 NH 750
Re: Nighthawk S restomod
« Reply #4 on: January 25, 2018, 02:19:55 PM »

Offline glenncal1

  • Member
  • **
  • Posts: 25
    • View Profile
  • Bike: 1993 Nighthawk
Re: Nighthawk S restomod
« Reply #5 on: January 27, 2018, 08:43:11 AM »
I agree with you that the "S" was ahead of its time. I like your take on personalizing the bike without going away from the original style.

 

Copyright © 2006 - 2018 Nighthawk-Forums.com
All Rights Reserved