Username: Password:

Author Topic: Clutch removal problem  (Read 105 times)

Offline Tex

  • New Member
  • *
  • Posts: 2
    • View Profile
  • Bike: Cb750sc trike
Clutch removal problem
« on: January 28, 2018, 10:31:44 AM »
Hi there, I’ve a 1983 US 750sc , when taking the clutch cover off I expected to see 6 bolts holding the pressure plate, but nothing to put a socket or spanner on , a bearing in the centre then a cover plate where you’d expect to see the 6 bolts, the ‘cover’ plate has 3 notches around the circumference, spin it off with a punch and hammer I wondered, surely not . So I downloaded the exact service manual for my model and it shows a clutch like i expected to see originally. Everything I pull up off the web never shows my clutch. Is the engine possibly out off a later bike ? I’ve looked at it for ages but can’t see how to get them clutch plates out. Any ideas please , I feel I must be missing something, maybe an expensive Honda service tool is needed , I really don’t know mate. Hears hoping, Cheers Tex

Offline glenncal1

  • Member
  • **
  • Posts: 25
    • View Profile
  • Bike: 1993 Nighthawk
Re: Clutch removal problem
« Reply #1 on: January 30, 2018, 07:03:01 AM »
Can you post a photo?


Copyright © 2006 - 2018
All Rights Reserved