Vorsprung 
New Member
Offline
Gender: 
Age: 25
Location: "Sunny" San Diego, CA
Bike: 1983 Honda Nighthawk 650
Posts: 6
Join Date: Oct, 2010
|
 |
« on: October 20, 2010, 07:15:45 PM » |
|
Hey,
I ran down my battery not knowing that idling doesn't charge it up, and I haven't gone on any rides long enough to charge it back up all the way. I didn't want to get another push start, so I'm just installing a battery tender (also useful for when I'm on work travel) and I'm having a little trouble. I remove the right side cover and unbolt the little swingarm covering my battery and disconnect the overflow hose, but that battery is stuck in there pretty good. Am I doing this the right way, or should I try to attach the little eyelet connects to other points where the battery is connected?
Thanks, KP
|
|
|
|
|
Logged
|
|
|
|
scoathy
Dedicated Member
  
Offline
Gender: 
Location: Wylie, Texas
Bike: 1984 Nighthawk 650
Posts: 626
Join Date: Apr, 2010
|
 |
« Reply #1 on: October 20, 2010, 07:34:48 PM » |
|
if the battery will not slide out when you open the swing arm then I would guess one of the following possibilities:
wrong size battery cables are wedged between battery and battery box some foreign object is wedged between the battery and side/s of the battery box some sticky-icky substances has adhered the bottom of the battery to the battery box.
I'd pull out the flashlight and see what you find above and on the sides of the battery.
Will it slide upward at all?
Good luck!
|
|
|
|
|
Logged
|
|
|
|
Vorsprung 
New Member
Offline
Gender: 
Age: 25
Location: "Sunny" San Diego, CA
Bike: 1983 Honda Nighthawk 650
Posts: 6
Join Date: Oct, 2010
|
 |
« Reply #2 on: October 20, 2010, 09:15:23 PM » |
|
Thanks for the reply scoathy. I can't get that thing to move in any direction, partially because I can't get a very good grip on it. I checked out my battery again, it doesn't look like there's anything on the sides that's all clear. My only guesses is that there's something on the bottom (rust doesn't stick to plastic I think) or that there is a cable on the top, looks like the positive cable is connected to the solenoid or something.   Is there anywhere else you think I can attach those cables? I was thinking putting one eyelet where that red cap on the left is (I think it goes over to the positive terminal) and the other over on the right... or should I put that on the chassis somewhere? In case those images don't load: http://img101.imageshack.us/i/img2730g.jpg/http://img99.imageshack.us/i/img2729k.jpg/
|
|
|
|
|
Logged
|
|
|
|
windrider
Windrider
Dedicated Member
  
Offline
Gender: 
Age: 53
Location: Winston-Salem, North Carolina
Posts: 540
Join Date: Jun, 2009
2000 750 Nighthawk
|
 |
« Reply #3 on: October 20, 2010, 11:07:44 PM » |
|
The battery should slide out. I would try to pry up on it a bit, carefully. The positive cable may have it jammed. You can put the battery tender positive cable on the connection under the red cap. Just check and make sure it is "hot" all the time. Use a meter or a test light to verify. The negative cable from the battery tender can go anywhere to the metal frame or engine. Just remember, sooner or later that battery has got to come out. Might as well figure it out now, while you're not riding. Good Luck.
|
|
|
|
|
Logged
|
My wife rides a Yamaha 650 V Star Classic
|
|
|
ariwhiteboy
Child Psychologist (No, Really)
--- NHF---
Offline
Gender: 
Age: 26
Location: Rincon, Georgia
Bike: 1994 Honda CB1000 -"LiterHawk", 1992 Honda 750 Night Hawk (Totaled)
Posts: 8208
Join Date: Mar, 2010
Carpe Navitas
|
 |
« Reply #4 on: October 21, 2010, 04:21:32 AM » |
|
 to the forum! Hope you are able to get that battery out. While a battery tender is a great idea, just know that it will take a loonnng time to charge a battery that has been run down. If you have access to one a regular charger would be a better bet for this task, then once the battery is charged plug it into the battery tender during periods of non-riding. Keep us posted and ride safe! 
|
|
|
|
|
Logged
|
What is good Phaedrus, what is not good? Need we ask anyone this?
|
|
|
drdubb
--- NHF---
Offline
Gender: 
Age: 58
Location: Raleigh, North Carolina
Bike: '95 750 Nighthawk, '83 650SC Nighthawk, '71 SL350K1
Posts: 2805
Join Date: Dec, 2009
|
 |
« Reply #5 on: October 21, 2010, 07:27:21 AM » |
|
I had some of the same problems. with my 650. That battery space is tight. The PO had jury rigged the batter cables and that what was jamming mine. When I did get it out, I got some cables off ebay and then for the trickle charger, I made a ring connector and leave it on the battery permanently. I just plug in the charger now. I used tie wraps to attach plug to the frame in an out of the way space.
|
|
|
|
|
Logged
|
Dance as if no one is looking.
|
|
|
|
Laminar
|
 |
« Reply #6 on: October 21, 2010, 07:47:32 AM » |
|
|
|
|
|
|
Logged
|
It's not what it is, it's what it does.
|
|
|
|
Laminar
|
 |
« Reply #7 on: October 21, 2010, 07:48:12 AM » |
|
It's likely that the positive cable is wedged in there. Time to start yanking.
|
|
|
|
|
Logged
|
It's not what it is, it's what it does.
|
|
|
Vorsprung 
New Member
Offline
Gender: 
Age: 25
Location: "Sunny" San Diego, CA
Bike: 1983 Honda Nighthawk 650
Posts: 6
Join Date: Oct, 2010
|
 |
« Reply #8 on: October 21, 2010, 09:34:01 AM » |
|
Thanks for the help everyone, I really appreciate it. I'll give it another go tonight, if I can't get the sucker to pull out then I'll attach the tender at some other points.
What a great way to start off being a member of this forum.
|
|
|
|
|
Logged
|
|
|
|
Munkey
Senior Member
   
Offline
Gender: 
Age: 50
Location: Paducah, KY
Bike: 1985 CB700SC Nighthawk S
Posts: 1930
Join Date: Jul, 2009
|
 |
« Reply #9 on: October 21, 2010, 09:39:59 AM » |
|
You should probaby charge your battery with a real battery charger first. Battery tenders are designed to put a very small current into the battery to prevent a fully charged battery from losing it's charge during times when they are not being used. They are not meant to bring a discharged battery back up to full charge.
I'm not saying your tender idea is a bad one, just don't expect it to bring your dead battery back to full charge.
|
|
|
|
|
Logged
|
1985 CB700SC Nighthawk
|
|
|
bajakirch
--- NHF---
Offline
Bike: 1983 CB550SC
Posts: 3218
Join Date: May, 2009
"Get on your bikes and ride!" - Freddie Mercury
|
 |
« Reply #10 on: October 21, 2010, 11:02:55 AM » |
|
I have a 550, but there's a lot of similarity in parts and functions between the 2 models. IDK if the 650 uses the same battery as the 550, but in the photos that battery seems wider than the one in my 550. That could be part of the problem.
I had trouble getting the battery out once too. Turned out the postive cable had gotten jammed in there. It took some tugging, but it finally came out. Hard part, as you said, is that it's darn near impossible to get a good grip on the thing.
And IIRC, there's no access to the battery from the top, so taking the seat off probably won't help. Maybe you can fit a screwdriver or rod of some sort in from the left side somewhere and give it a push (just be careful you don't puncture the battery).
I ended up installying a pigtail on my battery so I can easily hook it up to my charger. I'll top the battery off for an hour or so before or after riding and it's been working well all season. A combination of a new battery (purchased last fall) and the regular top-offs has virtually eliminated the starting problems I had last season.
|
|
|
|
|
Logged
|
It's not a big motorcycle Just a groovy little motorbike
|
|
|
Vorsprung 
New Member
Offline
Gender: 
Age: 25
Location: "Sunny" San Diego, CA
Bike: 1983 Honda Nighthawk 650
Posts: 6
Join Date: Oct, 2010
|
 |
« Reply #11 on: October 21, 2010, 06:31:05 PM » |
|
Just wanted to let you all know it was the positive cable wedged in there, I unscrewed the lead you see in the picture and then used it to pull the battery out. My only question is for the negative lead, is there some reason I can't just attach it directly to the battery? Does it actually have to go to a point on the chassis?
As for my tender, the manual says it also has a charging mode before it switches to that low-current mode. It should be overnight, so by tomorrow around noon (PST) I'd have no doubts about the battery being full.
|
|
|
|
|
Logged
|
|
|
|
|
Laminar
|
 |
« Reply #12 on: October 21, 2010, 07:01:37 PM » |
|
The negative lead needs to go from the battery negative post to one of the starter to engine mounts.
|
|
|
|
|
Logged
|
It's not what it is, it's what it does.
|
|
|
Brittles
--- NHF---
Offline
Gender: 
Age: 54
Location: Maryland
Bike: 1984 CB700SC
Posts: 3054
Join Date: Jan, 2009
|
 |
« Reply #13 on: October 21, 2010, 07:50:26 PM » |
|
My only question is for the negative lead, is there some reason I can't just attach it directly to the battery? Does it actually have to go to a point on the chassis?
Yes, you can attach the negative to the battery. It doesn't really matter as long as it's grounded.
|
|
|
|
|
Logged
|
John
'84 CB700SC '04 XL1200C
|
|
|
Vorsprung 
New Member
Offline
Gender: 
Age: 25
Location: "Sunny" San Diego, CA
Bike: 1983 Honda Nighthawk 650
Posts: 6
Join Date: Oct, 2010
|
 |
« Reply #14 on: October 21, 2010, 08:06:33 PM » |
|
Thanks for your help all, I got the charger/tender plugged in and it's going along. Hopefully there's nothing else that keeps me from starting up, it was pretty much golden every time when I first got the bike about a month ago!  Freakin' love these smilies...
|
|
|
|
|
Logged
|
|
|
|
edac
Contributing Member
 
Offline
Gender: 
Location: chicagoland
Bike: cb450sc
Posts: 222
Join Date: Sep, 2010
|
 |
« Reply #15 on: October 21, 2010, 09:47:52 PM » |
|
 I like the banana 
|
|
|
|
|
Logged
|
|
|
|
|